Ir para o conteúdo principal
Version: 3.6.0

Deployment

Para construir os arquivos estáticos do seu site para produção, execute:

npm run build

Once it finishes, the static files will be generated within the build directory.

note

The only responsibility of Docusaurus is to build your site and emit static files in build.

Agora cabe a você escolher como hospedar esses arquivos estáticos.

You can deploy your site to static site hosting services such as Vercel, GitHub Pages, Netlify, Render, and Surge.

Um site Docusaurus é renderizado estaticamente e geralmente pode funcionar sem JavaScript!

Configuration​

The following parameters are required in docusaurus.config.js to optimize routing and serve files from the correct location:

NomeDescrição
urlURL for your site. For a site deployed at https://my-org.com/my-project/, url is https://my-org.com/.
baseUrlBase URL for your project, with a trailing slash. For a site deployed at https://my-org.com/my-project/, baseUrl is /my-project/.

Testing your Build Locally​

It is important to test your build locally before deploying it for production. Docusaurus provides a docusaurus serve command for that:

npm run serve

By default, this will load your site at http://localhost:3000/.

Trailing slash configuration​

Docusaurus has a trailingSlash config to allow customizing URLs/links and emitted filename patterns.

O valor padrão geralmente funciona bem. Unfortunately, each static hosting provider has a different behavior, and deploying the exact same site to various hosts can lead to distinct results. Dependendo do seu host, pode ser útil alterar essa configuração.

tip

Use slorber/trailing-slash-guide to understand better the behavior of your host and configure trailingSlash appropriately.

Using environment variables​

Putting potentially sensitive information in the environment is common practice. However, in a typical Docusaurus website, the docusaurus.config.js file is the only interface to the Node.js environment (see our architecture overview), while everything else (MDX pages, React components, etc.) are client side and do not have direct access to the process global variable. In this case, you can consider using customFields to pass environment variables to the client side.

docusaurus.config.js
// If you are using dotenv (https://www.npmjs.com/package/dotenv)
import 'dotenv/config';

export default {
  title: '...',
  url: process.env.URL, // You can use environment variables to control site specifics as well
  customFields: {
    // Put your custom environment here
    teamEmail: process.env.EMAIL,
  },
};
home.jsx
import useDocusaurusContext from '@docusaurus/useDocusaurusContext';

export default function Home() {
  const {
    siteConfig: {customFields},
  } = useDocusaurusContext();
  return <div>Contact us through {customFields.teamEmail}!</div>;
}

Choosing a hosting provider​

There are a few common hosting options:

  • Self hosting with an HTTP server like Apache2 or Nginx.
  • Jamstack providers (e.g. Netlify and Vercel). We will use them as references, but the same reasoning can apply to other providers.
  • GitHub Pages (by definition, it is also Jamstack, but we compare it separately).

If you are unsure of which one to choose, ask the following questions:

How many resources (money, person-hours, etc.) am I willing to invest in this?

  • 🔴 Self-hosting requires experience in networking as well as Linux and web server administration. It's the most difficult option, and would require the most time to manage successfully. Expense-wise, cloud services are almost never free, and purchasing/deploying an onsite server can be even more costly.
  • 🟢 Jamstack providers can help you set up a working website in almost no time and offer features like server-side redirects that are easily configurable. Many providers offer generous build-time quotas even for free plans that you would almost never exceed. However, free plans have limits, and you would need to pay once you hit those limits. Check the pricing page of your provider for details.
  • 🟡 The GitHub Pages deployment workflow can be tedious to set up. (Evidence: see the length of Deploying to GitHub Pages!) However, this service (including build and deployment) is always free for public repositories, and we have detailed instructions to help you make it work.
How much server-side customization do I need?
  • 🟢 With self-hosting, you have access to the entire server's configuration. You can configure the virtual host to serve different content based on the request URL, you can do complicated server-side redirects, you can implement authentication, and so on. If you need a lot of server-side features, self-host your website.
  • 🟡 Jamstack usually offers some server-side configuration (e.g. URL formatting (trailing slashes), server-side redirects, etc.).
  • 🔴 GitHub Pages doesn't expose server-side configuration besides enforcing HTTPS and setting CNAME records.
Do I need collaboration-friendly deployment workflows?
  • 🟡 Self-hosted services can leverage continuous deployment functionality like Netlify, but more heavy-lifting is involved. Usually, you would designate a specific person to manage the deployment, and the workflow wouldn't be very git-based as opposed to the other two options.
  • 🟢 Netlify and Vercel have deploy previews for every pull request, which is useful for a team to review work before merging to production. You can also manage a team with different member access to the deployment.
  • 🟡 GitHub Pages cannot do deploy previews in a non-convoluted way. One repo can only be associated with one site deployment. On the other hand, you can control who has write access to the site's deployment.

There isn't a silver bullet. You need to weigh your needs and resources before making a choice.

Self-Hosting​

Docusaurus can be self-hosted using docusaurus serve. Change port using --port and --host to change host.

npm run serve -- --build --port 80 --host 0.0.0.0
warning

Não é a melhor opção, em comparação com um provedor de hospedagem estática / CDN.

warning

In the following sections, we will introduce a few common hosting providers and how they should be configured to deploy Docusaurus sites most efficiently. Docusaurus is not affiliated with any of these services, and this information is provided for convenience only. Some of the write-ups are provided by third-parties, and recent API changes may not be reflected on our side. If you see outdated content, PRs are welcome.

Because we can only provide this content on a best-effort basis only, we have stopped accepting PRs adding new hosting options. You can, however, publish your writeup on a separate site (e.g. your blog, or the provider's official website), and ask us to include a link to your writeup.

Deploying to Netlify​

To deploy your Docusaurus sites to Netlify, first make sure the following options are properly configured:

docusaurus.config.js
export default {
  url: 'https://docusaurus-2.netlify.app', // Url to your site with no trailing slash
  baseUrl: '/', // Base directory of your site relative to your repo
  // ...
};

Then, create your site with Netlify.

Enquanto você configura o site, especifique os comandos de compilação e os diretórios da seguinte forma:

  • build command: npm run build
  • publish directory: build

If you did not configure these build options, you may still go to "Site settings" -> "Build & deploy" after your site is created.

Once properly configured with the above options, your site should deploy and automatically redeploy upon merging to your deploy branch, which defaults to main.

warning

Some Docusaurus sites put the docs folder outside of website (most likely former Docusaurus v1 sites):

repo           # git root
├── docs       # MD files
└── website    # Docusaurus root

If you decide to use the website folder as Netlify's base directory, Netlify will not trigger builds when you update the docs folder, and you need to configure a custom ignore command:

website/netlify.toml
[build]
  ignore = "git diff --quiet $CACHED_COMMIT_REF $COMMIT_REF . ../docs/"
warning

Por padrão, o Netlify adiciona barras de rastreamento às URLs do Docusaurus.

It is recommended to disable the Netlify setting Post Processing > Asset Optimization > Pretty Urls to prevent lowercase URLs, unnecessary redirects, and 404 errors.

Be very careful: the Disable asset optimization global checkbox is broken and does not really disable the Pretty URLs setting in practice. Please make sure to uncheck it independently.

If you want to keep the Pretty Urls Netlify setting on, adjust the trailingSlash Docusaurus config appropriately.

Refer to slorber/trailing-slash-guide for more information.

Deploying to Vercel​

Deploying your Docusaurus project to Vercel will provide you with various benefits in the areas of performance and ease of use.

To deploy your Docusaurus project with a Vercel for Git Integration, make sure it has been pushed to a Git repository.

Import the project into Vercel using the Import Flow. During the import, you will find all relevant options preconfigured for you; however, you can choose to change any of these options.

After your project has been imported, all subsequent pushes to branches will generate Preview Deployments, and all changes made to the Production Branch (usually "main" or "master") will result in a Production Deployment.

Deploying to GitHub Pages​

Docusaurus provides an easy way to publish to GitHub Pages, which comes free with every GitHub repository.

Overview​

Usually, there are two repositories (at least two branches) involved in a publishing process: the branch containing the source files, and the branch containing the build output to be served with GitHub Pages. In the following tutorial, they will be referred to as "source" and "deployment", respectively.

Each GitHub repository is associated with a GitHub Pages service. If the deployment repository is called my-org/my-project (where my-org is the organization name or username), the deployed site will appear at https://my-org.github.io/my-project/. If the deployment repository is called my-org/my-org.github.io (the organization GitHub Pages repo), the site will appear at https://my-org.github.io/.

info

In case you want to use your custom domain for GitHub Pages, create a CNAME file in the static directory. Anything within the static directory will be copied to the root of the build directory for deployment. When using a custom domain, you should be able to move back from baseUrl: '/projectName/' to baseUrl: '/', and also set your url to your custom domain.

You may refer to GitHub Pages' documentation User, Organization, and Project Pages for more details.

GitHub Pages picks up deploy-ready files (the output from docusaurus build) from the default branch (master / main, usually) or the gh-pages branch, and either from the root or the /docs folder. You can configure that through Settings > Pages in your repository. This branch will be called the "deployment branch".

We provide a docusaurus deploy command that helps you deploy your site from the source branch to the deployment branch in one command: clone, build, and commit.

docusaurus.config.js settings​

First, modify your docusaurus.config.js and add the following params:

NomeDescrição
organizationNameThe GitHub user or organization that owns the deployment repository.
projectNameThe name of the deployment repository.
deploymentBranchThe name of the deployment branch. It defaults to 'gh-pages' for non-organization GitHub Pages repos (projectName not ending in .github.io). Otherwise, it needs to be explicit as a config field or environment variable.

These fields also have their environment variable counterparts which have a higher priority: ORGANIZATION_NAME, PROJECT_NAME, and DEPLOYMENT_BRANCH.

warning

O GitHub Pages adiciona uma barra à direita nas URLs do Docusaurus por padrão. It is recommended to set a trailingSlash config (true or false, not undefined).

Exemplo:

docusaurus.config.js
export default {
  // ...
  url: 'https://endiliey.github.io', // Your website URL
  baseUrl: '/',
  projectName: 'endiliey.github.io',
  organizationName: 'endiliey',
  trailingSlash: false,
  // ...
};
warning

By default, GitHub Pages runs published files through Jekyll. Since Jekyll will discard any files that begin with _, it is recommended that you disable Jekyll by adding an empty file named .nojekyll file to your static directory.

Environment settings​

NomeDescrição
USE_SSHSet to true to use SSH instead of the default HTTPS for the connection to the GitHub repo. If the source repo URL is an SSH URL (e.g. [email protected]:facebook/docusaurus.git), USE_SSH is inferred to be true.
GIT_USERThe username for a GitHub account that has push access to the deployment repo. Para seus próprios repositórios, este geralmente será o seu nome de usuário do GitHub. Required if not using SSH, and ignored otherwise.
GIT_PASSPersonal access token of the git user (specified by GIT_USER), to facilitate non-interactive deployment (e.g. continuous deployment)
CURRENT_BRANCHThe source branch. Usually, the branch will be main or master, but it could be any branch except for gh-pages. If nothing is set for this variable, then the current branch from which docusaurus deploy is invoked will be used.
GIT_USER_NAMEThe git config user.name value to use when pushing to the deployment repo
GIT_USER_EMAILThe git config user.email value to use when pushing to the deployment repo

As instalações corporativas do GitHub devem funcionar da mesma maneira que o github.com; você só precisa definir o host GitHub Enterprise da organização como uma variável de ambiente:

NomeDescrição
GITHUB_HOSTO nome de domínio do seu site corporativo GitHub.
GITHUB_PORTA porta do seu site corporativo GitHub.

Deploy​

Finalmente, para fazer o deploy do seu site no GitHub Pages, execute:

GIT_USER=<GITHUB_USERNAME> yarn deploy
warning

Beginning in August 2021, GitHub requires every command-line sign-in to use the personal access token instead of the password. When GitHub prompts for your password, enter the PAT instead. See the GitHub documentation for more information.

Alternatively, you can use SSH (USE_SSH=true) to log in.

Triggering deployment with GitHub Actions​

GitHub Actions allow you to automate, customize, and execute your software development workflows right in your repository.

The workflow examples below assume your website source resides in the main branch of your repository (the source branch is main), and your publishing source is configured for publishing with a custom GitHub Actions Workflow.

Our goal is that:

  1. When a new pull request is made to main, there's an action that ensures the site builds successfully, without actually deploying. This job will be called test-deploy.
  2. When a pull request is merged to the main branch or someone pushes to the main branch directly, it will be built and deployed to GitHub Pages. This job will be called deploy.

Here are two approaches to deploying your docs with GitHub Actions. Based on the location of your deployment repository, choose the relevant tab below:

  • Source repo and deployment repo are the same repository.
  • The deployment repo is a remote repository, different from the source. Instructions for this scenario assume publishing source is the gh-pages branch.

While you can have both jobs defined in the same workflow file, the original deploy workflow will always be listed as skipped in the PR check suite status, which is not indicative of the actual status and provides no value to the review process. We therefore propose to manage them as separate workflows instead.

GitHub action files

Add these two workflow files:

Tweak the parameters for your setup

These files assume you are using Yarn. If you use npm, change cache: yarn, yarn install --frozen-lockfile, yarn build to cache: npm, npm ci, npm run build accordingly.

If your Docusaurus project is not at the root of your repo, you may need to configure a default working directory, and adjust the paths accordingly.

.github/workflows/deploy.yml
name: Deploy to GitHub Pages

on:
  push:
    branches:
      - main
    # Review gh actions docs if you want to further define triggers, paths, etc
    # https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#on

jobs:
  build:
    name: Build Docusaurus
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0
      - uses: actions/setup-node@v4
        with:
          node-version: 18
          cache: yarn

      - name: Install dependencies
        run: yarn install --frozen-lockfile
      - name: Build website
        run: yarn build

      - name: Upload Build Artifact
        uses: actions/upload-pages-artifact@v3
        with:
          path: build

  deploy:
    name: Deploy to GitHub Pages
    needs: build

    # Grant GITHUB_TOKEN the permissions required to make a Pages deployment
    permissions:
      pages: write # to deploy to Pages
      id-token: write # to verify the deployment originates from an appropriate source

    # Deploy to the github-pages environment
    environment:
      name: github-pages
      url: ${{ steps.deployment.outputs.page_url }}

    runs-on: ubuntu-latest
    steps:
      - name: Deploy to GitHub Pages
        id: deployment
        uses: actions/deploy-pages@v4
.github/workflows/test-deploy.yml
name: Test deployment

on:
  pull_request:
    branches:
      - main
    # Review gh actions docs if you want to further define triggers, paths, etc
    # https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#on

jobs:
  test-deploy:
    name: Test deployment
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0
      - uses: actions/setup-node@v4
        with:
          node-version: 18
          cache: yarn

      - name: Install dependencies
        run: yarn install --frozen-lockfile
      - name: Test build website
        run: yarn build
Site not deployed properly?

After pushing to main, if you don't see your site published at the desired location (for example, it says "There isn't a GitHub Pages site here", or it's showing your repo's README.md file), try the following:

  • Wait about three minutes and refresh. It may take a few minutes for GitHub pages to pick up the new files.
  • Check your repo's landing page for a little green tick next to the last commit's title, indicating the CI has passed. If you see a cross, it means the build or deployment failed, and you should check the log for more debugging information.
  • Click on the tick and make sure you see a "Deploy to GitHub Pages" workflow. Names like "pages build and deployment / deploy" are GitHub's default workflows, indicating your custom deployment workflow failed to be triggered at all. Make sure the YAML files are placed under the .github/workflows folder, and that the trigger condition is set correctly (e.g., if your default branch is "master" instead of "main", you need to change the on.push property).
  • Under your repo's Settings > Pages, make sure the "Source" (which is the source for the deployment files, not "source" as in our terminology) is set to "gh-pages" + "/ (root)", since we are using gh-pages as the deployment branch.

If you are using a custom domain:

Triggering deployment with Travis CI​

Continuous integration (CI) services are typically used to perform routine tasks whenever new commits are checked in to source control. These tasks can be any combination of running unit tests and integration tests, automating builds, publishing packages to npm, and deploying changes to your website. All you need to do to automate the deployment of your website is to invoke the yarn deploy script whenever your website is updated. The following section covers how to do just that using Travis CI, a popular continuous integration service provider.

  1. Go to https://github.com/settings/tokens and generate a new personal access token. When creating the token, grant it the repo scope so that it has the permissions it needs.
  2. Using your GitHub account, add the Travis CI app to the repository you want to activate.
  3. Abra seu painel do Travis CI. The URL looks like https://travis-ci.com/USERNAME/REPO, and navigate to the More options > Setting > Environment Variables section of your repository.
  4. Create a new environment variable named GH_TOKEN with your newly generated token as its value, then GH_EMAIL (your email address) and GH_NAME (your GitHub username).
  5. Create a .travis.yml on the root of your repository with the following:
.travis.yml
language: node_js
node_js:
  - 18
branches:
  only:
    - main
cache:
  yarn: true
script:
  - git config --global user.name "${GH_NAME}"
  - git config --global user.email "${GH_EMAIL}"
  - echo "machine github.com login ${GH_NAME} password ${GH_TOKEN}" > ~/.netrc
  - yarn install
  - GIT_USER="${GH_NAME}" yarn deploy

Now, whenever a new commit lands in main, Travis CI will run your suite of tests and if everything passes, your website will be deployed via the yarn deploy script.

Triggering deployment with Buddy​

Buddy is an easy-to-use CI/CD tool that allows you to automate the deployment of your portal to different environments, including GitHub Pages.

Follow these steps to create a pipeline that automatically deploys a new version of your website whenever you push changes to the selected branch of your project:

  1. Go to https://github.com/settings/tokens and generate a new personal access token. When creating the token, grant it the repo scope so that it has the permissions it needs.
  2. Acesse sua conta do Buddy e crie um novo projeto.
  3. Escolha o GitHub como seu provedor de hospedagem git e selecione o repositório com o código do seu site.
  4. Using the left navigation panel, switch to the Pipelines view.
  5. Crie uma nova pipeline. Define its name, set the trigger mode to On push, and select the branch that triggers the pipeline execution.
  6. Add a Node.js action.
  7. Add these commands in the action's terminal:
GIT_USER=<GH_PERSONAL_ACCESS_TOKEN>
git config --global user.email "<YOUR_GH_EMAIL>"
git config --global user.name "<YOUR_GH_USERNAME>"
yarn deploy

After creating this simple pipeline, each new commit pushed to the branch you selected deploys your website to GitHub Pages using yarn deploy. Read this guide to learn more about setting up a CI/CD pipeline for Docusaurus.

Using Azure Pipelines​

  1. Sign Up at Azure Pipelines if you haven't already.
  2. Create an organization. Within the organization, create a project and connect your repository from GitHub.
  3. Go to https://github.com/settings/tokens and generate a new personal access token with the repo scope.
  4. In the project page (which looks like https://dev.azure.com/ORG_NAME/REPO_NAME/_build), create a new pipeline with the following text. Also, click on edit and add a new environment variable named GH_TOKEN with your newly generated token as its value, then GH_EMAIL (your email address) and GH_NAME (your GitHub username). Certifique-se de marcá-los como secretos. Alternatively, you can also add a file named azure-pipelines.yml at your repository root.
azure-pipelines.yml
trigger:
  - main

pool:
  vmImage: ubuntu-latest

steps:
  - checkout: self
    persistCredentials: true

  - task: NodeTool@0
    inputs:
      versionSpec: '18'
    displayName: Install Node.js

  - script: |
      git config --global user.name "${GH_NAME}"
      git config --global user.email "${GH_EMAIL}"
      git checkout -b main
      echo "machine github.com login ${GH_NAME} password ${GH_TOKEN}" > ~/.netrc
      yarn install
      GIT_USER="${GH_NAME}" yarn deploy
    env:
      GH_NAME: $(GH_NAME)
      GH_EMAIL: $(GH_EMAIL)
      GH_TOKEN: $(GH_TOKEN)
    displayName: Install and build

Using Drone​

  1. Create a new SSH key that will be the deploy key for your project.
  2. Name your private and public keys to be specific and so that it does not overwrite your other SSH keys.
  3. Go to https://github.com/USERNAME/REPO/settings/keys and add a new deploy key by pasting in the public key you just generated.
  4. Open your Drone.io dashboard and log in. The URL looks like https://cloud.drone.io/USERNAME/REPO.
  5. Click on the repository, click on activate repository, and add a secret called git_deploy_private_key with your private key value that you just generated.
  6. Create a .drone.yml on the root of your repository with the below text.
.drone.yml
kind: pipeline
type: docker
trigger:
  event:
    - tag
- name: Website
  image: node
  commands:
    - mkdir -p $HOME/.ssh
    - ssh-keyscan -t rsa github.com >> $HOME/.ssh/known_hosts
    - echo "$GITHUB_PRIVATE_KEY" > "$HOME/.ssh/id_rsa"
    - chmod 0600 $HOME/.ssh/id_rsa
    - cd website
    - yarn install
    - yarn deploy
  environment:
    USE_SSH: true
    GITHUB_PRIVATE_KEY:
      from_secret: git_deploy_private_key

Now, whenever you push a new tag to GitHub, this trigger will start the drone CI job to publish your website.

Deploying to Flightcontrol​

Flightcontrol is a service that automatically builds and deploys your web apps to AWS Fargate directly from your Git repository. It gives you full access to inspect and make infrastructure changes without the limitations of a traditional PaaS.

Get started by following Flightcontrol's step-by-step Docusaurus guide.

Deploying to Koyeb​

Koyeb is a developer-friendly serverless platform to deploy apps globally. The platform lets you seamlessly run Docker containers, web apps, and APIs with git-based deployment, native autoscaling, a global edge network, and built-in service mesh and discovery. Check out the Koyeb's Docusaurus deployment guide to get started.

Deploying to Render​

Render offers free static site hosting with fully managed SSL, custom domains, a global CDN, and continuous auto-deploy from your Git repo. Get started in just a few minutes by following Render's guide to deploying Docusaurus.

Deploying to Qovery​

Qovery is a fully-managed cloud platform that runs on your AWS, Digital Ocean, and Scaleway account where you can host static sites, backend APIs, databases, cron jobs, and all your other apps in one place.

  1. Cria uma conta no Qovery. Visit the Qovery dashboard to create an account if you don't already have one.
  2. Create a project.
    • Click on Create project and give a name to your project.
    • Click on Next.
  3. Create a new environment.
    • Click on Create environment and give a name (e.g. staging, production).
  4. Add an application.
    • Click on Create an application, give a name and select your GitHub or GitLab repository where your Docusaurus app is located.
    • Define o nome da ramificação principal e o caminho da aplicação raiz.
    • Click on Create. Depois que o aplicativo for criado:
    • Navigate to your application Settings
    • Select Port
    • Adicionar a porta usada pelo aplicativo Docusaurus
  5. Deploy
    • All you have to do now is to navigate to your application and click on Deploy.

Deploy the app

That's it. Watch the status and wait till the app is deployed. To open the application in your browser, click on Action and Open in your application overview.

Deploying to Hostman​

Hostman allows you to host static websites for free. Hostman automates everything, you just need to connect your repository and follow these easy steps:

  1. Create a service.

    • To deploy a Docusaurus static website, click Create in the top-left corner of your Dashboard and choose Front-end app or static website.

  2. Select the project to deploy.

    • If you are logged in to Hostman with your GitHub, GitLab, or Bitbucket account, you will see the repository with your projects, including the private ones.

    • Choose the project you want to deploy. It must contain the directory with the project's files (e.g. website).

    • To access a different repository, click Connect another repository.

    • If you didn't use your Git account credentials to log in, you'll be able to access the necessary account now, and then select the project.

  3. Configure the build settings.

    • Next, the Website customization window will appear. Choose the Static website option from the list of frameworks.

    • The Directory with app points at the directory that will contain the project's files after the build. If you selected the repository with the contents of the website (or my_website) directory during Step 2, you can leave it empty.

    • The standard build command for Docusaurus is:

      npm run build

    • You can modify the build command if needed. You can enter multiple commands separated by &&.

  4. Deploy.

    • Click Deploy to start the build process.

    • Once it starts, you will enter the deployment log. If there are any issues with the code, you will get warning or error messages in the log specifying the cause of the problem. Usually, the log contains all the debugging data you'll need.

    • When the deployment is complete, you will receive an email notification and also see a log entry. All done! Your project is up and ready.

Deploying to Surge​

Surge is a static web hosting platform that you can use to deploy your Docusaurus project from the command line in seconds. Deploying your project to Surge is easy and free (including custom domains and SSL certs).

Deploy your app in a matter of seconds using Surge with the following steps:

  1. First, install Surge using npm by running the following command: 
    npm install -g surge
  2. To build the static files of your site for production in the root directory of your project, run: 
    npm run build
  3. Then, run this command inside the root directory of your project: 
    surge build/

First-time users of Surge would be prompted to create an account from the command line (which happens only once).

Confirm that the site you want to publish is in the build directory. A randomly generated subdomain *.surge.sh subdomain is always given (which can be edited).

Using your domain​

If you have a domain name you can deploy your site using the command:

surge build/ your-domain.com

Your site is now deployed for free at subdomain.surge.sh or your-domain.com depending on the method you chose.

Setting up CNAME file​

Store your domain in a CNAME file for future deployments with the following command:

echo subdomain.surge.sh > CNAME

You can deploy any other changes in the future with the command surge.

Deploying to Stormkit​

You can deploy your Docusaurus project to Stormkit, a deployment platform for static websites, single-page applications (SPAs), and serverless functions. For detailed instructions, refer to this guide.

Deploying to QuantCDN​

  1. Install Quant CLI
  2. Create a QuantCDN account by signing up
  3. Initialize your project with quant init and fill in your credentials: 
    quant init
  4. Deploy your site. 
    quant deploy

See docs and blog for more examples and use cases for deploying to QuantCDN.

Deploying to Layer0​

Layer0 is an all-in-one platform to develop, deploy, preview, experiment on, monitor, and run your headless frontend. It is focused on large, dynamic websites and best-in-class performance through EdgeJS (a JavaScript-based Content Delivery Network), predictive prefetching, and performance monitoring. Layer0 offers a free tier. Get started in just a few minutes by following Layer0's guide to deploying Docusaurus.

Deploying to Cloudflare Pages​

Cloudflare Pages is a Jamstack platform for frontend developers to collaborate and deploy websites. Get started within a few minutes by following this article.

Deploying to Azure Static Web Apps​

Azure Static Web Apps is a service that automatically builds and deploys full-stack web apps to Azure directly from the code repository, simplifying the developer experience for CI/CD. Static Web Apps separates the web application's static assets from its dynamic (API) endpoints. Static assets are served from globally-distributed content servers, making it faster for clients to retrieve files using servers nearby. Dynamic APIs are scaled with serverless architectures using an event-driven functions-based approach that is more cost-effective and scales on demand. Get started in a few minutes by following this step-by-step guide.

Deploying to Kinsta​

Kinsta Static Site Hosting lets you deploy up to 100 static sites for free, custom domains with SSL, 100 GB monthly bandwidth, and 260+ Cloudflare CDN locations.

Get started in just a few clicks by following our Docusaurus on Kinsta article.